Click to bigger picture..
Alex-307 blocked pipe dredger
Product introduction
Alex-307 pipeline dredger is applicable to the internal dirt treatment of various pipelines. Its scope of application covers the internal surface cleaning of heat exchange pipelines such as air preheater, power plant condenser, air preheater, gas primary cooling air and the internal surface cleaning and polishing of various pipelines
。Product parameters
|
model |
Voltage / current / power |
Speed / min |
Cleaning diameter |
Net weight of main engine |
|
ALEX-307 |
380V/10A/5.5KW |
0-2800 |
6.35-800mm |
150KG |
|
Net weight of control cabinet |
Host size |
Control cabinet size |
|
|
|
22KG |
800*520*520mm |
460*360*260mm |
|
|
|
Standard equipment configuration:One main machine, one control cabinet, four 8m flexible shafts (stainless steel drill pipe can be selected), four alloy steel cutter heads, 10 cleaning brushes, one additional flexible shaft, one 20m quick connect pipe, one certificate of conformity, one warranty card and one instruction manual |
||||
Product advantages
Double head design, double efficiency
The main shaft and auxiliary shaft can work at the same time, and they do not interfere with each other
Arbitrary stop and operation
0-2800 rpm, adjustable speed
The speed of frequency converter is adjustable, and the speed can be adjusted. It is recommended to handle the non blocked pipeline
The speed is 1000-200 rpm, and 2000 is recommended to deal with the blocked pipeline-
2800 rpm
Adjustable torque
The torque can be adjusted according to different flexible shafts to protect the stress degree of the flexible shaft
Extend the service life of flexible shaft (alex-206 equipment can match 6/8/10/12/
16 / 18 / 22 / 27mm flexible shaft)
Two cleaning modes: air flushing and water flushing
There are two cleaning modes: air flushing and water flushing, which can not be operated with water
The pipeline can be directly ventilated and dredged.
Treatable condition
Alex-307 blocked pipe dredger can be equipped with flexible shafts of various specifications, which has excellent blocking effect (it can handle blocked pipes that cannot be treated with 2800kg high-pressure water)Handle straight pipe, S-bend, L-Bend, U-bend and other pipesThe treatment pipe diameter ranges from 7mm to 800mm.
The plugging flexible shaft is mainly aimed at 25mmThe above blocking straight pipe dredging is used with internal thread cemented carbide steel cutter head.
The soft shaft of the blasting machine is mainly used to block the pipeline with a needle of more than 25mm(S-bend, L-Bend)It is used with external thread cemented carbide steel cutter head
10mm and 12mm flexible shafts are equipped with internal thread cutter head, and the cutter head can be directly pressed on the axis to deal with 14mm-25mmU-bend pipe
contact supplier or email to admin@b2bgood.com for transport and cleanrance agent 
