Click to bigger picture..
Portable Temporary Fence Panel Security Fence
- Panel Height: Most commonly 6 feet (1.8 meters) or 8 feet (2.4 meters)
- Panel Width: Usually around 9.5 feet (2.9 meters) or 10 feet (3 meters)
- Mesh Type: Welded wire mesh (as seen in the picture).The mesh to be a standard rectangular grid pattern
- Mesh Size: Typically 2 inches x 4 inches (50mm x 100mm)
- frame Material: Galvanized steel tubing
- frame Diameter: 1 3/8 inches (35mm) or 1 5/8 inches (40mm)
- base Type: Concrete or plastic feet (for stability),the bases are likely concrete or a heavy-duty plastic, designed to keep the panels upright.
- Finish: Often galvanized or powder-coated for weather resistance
- Color: The fencing in the picture is blue, which is a common color for temporary fencing.
Indoor Wire Mesh Temporary Fence Partition Panels
- Panel Height: 6 feet (1.8 meters) to 8 feet (2.4 meters).
- Panel Width: 4 feet (1.2 meters) and 8 feet (2.4 meters).
- Mesh Type: Welded wire mesh with a smaller grid pattern than outdoor fencing. This provides better visibility while still acting as a barrier.
- Mesh Size: 1 inch x 1 inch (25mm x 25mm) or 2 inch x 2 inch (50mm x 50mm).
- frame Material: Steel tubing, with a powder-coated finish for durability and visibility.
- frame Shape: Square or rectangular tubing.
- base Type: Feet or bases designed for indoor use on flat surfaces.
- Color: Yellow is a common color for safety barriers and high visibility.
Warehouse Temporary Security Fencing for Industrial Safety Guarding
- Panel Height: 4 feet (1.2 meters) to 8 feet (2.4 meters).
- Panel Width: 4 feet (1.2 meters) to 6 feet (1.8 meters). These panels often need to fit specific machine layouts.
- Mesh Type: Welded wire mesh, similar to warehouse dividers but potentially with a smaller mesh size for increased safety.
- Mesh Size: 1 inch x 1 inch (25mm x 25mm) or even smaller.
- frame Material: Strong steel tubing or profiles for impact resistance.
- frame Shape: Square or rectangular, often with additional bracing for strength.
- Mounting: These panels are typically bolted or fastened to the floor or to machinery frames for a more permanent installation than temporary fencing.
