Click to bigger picture..
CT61100/T2-011T series horizontal lathes
Main uses:
CT61100 and T2-011T horizontal lathes are improved in design on the basis of CQ61100 and T2-011 respectively, and new standards are adopted . After improvement , rigidity of spindle system is enhanced and is suitable for powerful and high-speed cutting. Feed of carriage in longitudinal and cross are fined ,thus the surface quality of parts is improved , The machine is available for turning cylinder and cones , and do the works of end turing, grooving, drilling , boring and trepanning , and also can cut all kinds of inside and outside metric threads, inch threads ,module threads ,etc.
The machine is characterized by compact structure , converient operation , low noise and high efficiency , and is also provided a complete set of accessories . This machine is especially suitable for various machine industry ,such as machine building industry , light-textile industry , petrochemical industry , valve industry, roll industry and so on .
|
ITEM |
CT61100 |
T2-011T |
|
Max.swing over bed |
1000mm |
1250mm |
|
center distance |
1000,1500,2000,3000,5000,6000,8000,10000mm |
|
|
Max.swing over carriage |
630mm |
880mm |
|
spindle hole bore |
100mm |
|
|
Taper in spindle nose |
1:20 |
|
|
Number of spindle speeds |
Forward 12 |
|
|
Reverse 12 |
||
|
Range of spindle speeds |
6-272rpm |
4.25-192rpm |
|
Range of feed per spindle revolution |
48kids |
|
|
Longitudinal 0.057-12.726mm |
||
|
Cross 0.027-6.096mm |
||
|
Range of metric threads |
46kinds 1-224mm |
|
|
Range of whitworth threads |
46kinds 28-1 t.p.i |
|
|
Range of module threads |
37kinds 0.25-56mm |
|
|
Workpiece held on the steady rest |
Φ50～Φ470mm |
|
|
Carriage |
|
|
|
Tool shank section |
45×45mm |
|
|
Max.travel of top slide |
350mm |
|
|
Rapid moving speed of tool post |
Longitudinal 3.8m/min |
|
|
Tailstock |
Cross 1.9m/min |
|
|
Diameter of center sleeve |
140mm |
|
|
Max.travel of center sleeve |
300mm |
|
|
Taper in center sleeve bore(Morse) |
Morse No.6 |
|
|
Main motor |
22KW 22KW |
|
|
Max.weight of workpieces between two centers |
6T |
|
|
Width of guideways on bed |
755mm |
|
Standard accessories : Steady rest ; follow rest, center, center sleeve, revolving center, oil gun, change-gears, and wrenches
Optional accessories: Open type steady rest, Grinding head attachment, Aggravating tailstock, Taper- turning attachment ,Doulbe tool carriers/tests
Without steady rest and follow rest for lathe under 1500mm center distance
CT61100/T2-011T series with A type are automatic feed of compound rest
contact supplier or email to admin@b2bgood.com for purchase help 
