===under info was translated buy computer, please contact the info poster===
| Grade: | G-3130 PC Teijin |
|---|
| Origin / manufacturer: | G-3130 PC Teijin |
|---|
| Application Level: | Injection Grade |
|---|
| Brand: | G-3130 PC Teijin |
|---|
| Model: | G-3130 PC Teijin |
|---|
Physical Properties| Contact Phone 13265203567 QQ1401307760 |
| Performance Items | Test Condition | Test Method | Numerical Description | Company |
| Mechanical Properties | Tensile Strength (Qiangdu lead Zhang) | | D638/ISO ASTM 527 | 126 (1280) | Kg/cm² (MPa) [Lb/in2] |
| Break Elongation At | | D638/ISO ASTM 527 | 3.5 | % |
| Tensile Modulus | | D638/ISO ASTM 527 | 8240 (84000) | Kg/cm² (MPa) [Lb/in2] |
| Elongation Tensile Yield (elongation) | | D638/ISO ASTM 527 | | % |
| At break Tensile Elongation (elongation) | | D638/ISO ASTM 527 | | % |
| Bending Modulus (bending elasticity) | | D790/ISO ASTM 178 | 7260 (74000) | Kg/cm² (MPa) [Lb/in2] |
| Bending Strength | | D790/ISO ASTM 178 | 186 (1900) | Kg/cm² (MPa) [Lb/in2] |
| Luo's Hardness | | D785 ASTM | | |
| Impact strength IZOD Notched | 1/4& 23 | D256/ISO ASTM 179 | | Kg· cm/cm (J/M) ft· lb/in |
| -30 1/4& | D256/ISO ASTM 179 | | Kg· cm/cm (J/M) ft· lb/in |
| 1/8& 23 | D256/ISO ASTM 179 | | Kg· cm/cm (J/M) ft· lb/in |
| -30 1/8& | D256/ISO ASTM 179 | | Kg· cm/cm (J/M) ft· lb/in |
| Strength Charpy Impact | 23 (GAP) | D256/ISO ASTM 179 | 160 (16) | Kg· cm/cm (J/M) ft· lb/in |
| -30 (GAP) | D256/ISO ASTM 179 | | Kg· cm/cm (J/M) ft· lb/in |
| 23 (no gap) | D256/ISO ASTM 179 | | Kg· cm/cm (J/M) ft· lb/in |
| -30 (no gap) | D256/ISO ASTM 179 | | Kg· cm/cm (J/M) ft· lb/in |
| Physical Property | Specific Gravity (density) | | D792/ISO ASTM 1183 | 1.43 | |
| Rate Molding Shrinkage | | D955 ASTM | | % |
| Melt Index (flow coefficient) | 200 /5kg | D1238/ISO ASTM 1133 | | G/10min |
| 220 /10kg | D1238/ISO ASTM 1133 | | G/10min |
| Rate of Water Absorption 23 /24H | | D570/ISO ASTM 62 | 0.12 | % |
| Thermal Performance | Temperature Heat Distortion | Annealing | D648/ISO ASTM 75 | | (degrees Fahrenheit) |
| No Annealing | D648/ISO ASTM 75 | | (degrees Fahrenheit) |
| Point VEKA Softening | | ASTM D1525/ISO R306 | | (degrees Fahrenheit) |
| Melting Point | | - | | (degrees Fahrenheit) |
| Combustion (rate) | | UL94 | | |
| Coefficient Linear Expansion | | D696/ISO ASTM 11359 | | Mm/mm. |
| Electrical Performance | Dielectric Constant | 100HZ | D150/IEC ASTM 60250 | | |
| 1MHZ | D150/IEC ASTM 60250 | | |
| Dielectric Loss | 100HZ | D150/IEC ASTM 60250 | | |
| 1MHZ | D150/IEC ASTM 60250 | | |
| Volume Resistivity | | D257/IEC ASTM 60093 | | Omega.Cm |
| Surface Resistivity | | D257/IEC ASTM 60093 | | Omega |
| Arc Resistance | | D495/IEC ASTM 60112 | | |
| Optical Properties | Refractive Index | | D542/ISO ASTM 489 | | |
| Transmittance | | D1003/ISO ASTM 13468 | | % |
| Fuzzy Coefficient (Haze) | | ISO 14782 | | % |
| Processing Conditions | Drying Condition | | | | |
| Processing Temperature | Nozzle | | | C |
| Front End | | | C |
| Material Barrel | | | C |
| Post Section | | | C |
| Melt Temperature | | | | C |
| Mould Temperature | | | | C |
| Pressure | Injection Pressure | | | Mpa |
| Holding Pressure | | | Mpa |
| Back Pressure | | | Mpa |
| Screw Speed | | | | RPM |
| Other | Remarks | |
| Color | |
| Characteristic | Electronic components, Electrical Appliances |
| Use | |
Нажмите, чтобы увеличить 
