Нажмите, чтобы увеличить 
The SD85x Power supply units are designed for high efficiency, electronic inrush current limitation, wide operating temperature range, and extraordinarily small size. The lowest power losses and high lifetime expectancy deliver the lowest cost of ownership.
The SD85x series complies for use in potentially explosive atmospheres (IECEx Zone 2, ATEX Zone 2, and Class I Div 2). The SD85x series has a built-in power reserve and can easy breaking fuses due to high overload peak current capability.
Please contact me get more information
Email:Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com
General info
Article number 3BSE088188R1
Type Power supply
Rated output current 10 A
Rated output power 240 W
Rated output voltage 24 V d.c.
Mains/input voltage, nominal 100-240 V a.c. 110-150 V d.c.
Applications SELV and PELV
Efficiency 93.6/95.2 % @ 120/230 V a.c.
Detailed data
Mains frequency 50 - 60 HZ +/- 6%
Load sharing Parallel connection
Supervision relay Yes
Power Factor (at rated output power) 0.99/0.97
Heat dissipation 16.4 W / 12.1 W, 120/230 V a.c.
Output voltage regulation at max. current max 50 mV 0 - 12 A
Maximum ambient temperature 70 °C
Primary: Recommended external fuse 10-20 A
Secondary: Short circuit Hiccup (2s on 18s off)
Output over voltage protection Max 32 V DC
AC input current 2.15 / 1.13 A
AC inrush current 6 A / 9 A peak
Please contact me get more information
Email:Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com
Environment and certification
CE mark Yes
Electrical safety IEC 60950-1
ATEX Zone 2 Yes
IECEx Zone 2 Yes
Hazardous Location, Class 1 Div 2 Yes
Hazardous Location ATEX Zone 2: EN 60079-0, EN60079-15; IECEx Zone 2: IEC 60079-0, IEC 60079-15; CSA Class I Div 2, Groups A, B, C D T4: ANSI/ISA 12.12.01-2015, C22.2 No. 213-M1987
Marine certification DNV-GL, ABS
Protection rating IP20 according to IEC 60529
Corrosive atmosphere ISA-S71.04 G3
Pollution degree Degree 2, IEC 62477-1
Mechanical operating conditions IEC 61131-2
EMC EN 61000-6-4 and EN 61000-6-2
Overvoltage Categories Category III (IEC 62477-1 for altitudes up to 2000 m)
Equipment class I PE (Protection Earth) connection required
Max ambient temperature -25 °C (-13 °F) to +70 °C (158 °F), derating 6W / °C between 60 °C - 70 °C
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
Dimensions
Width 39 mm (1.53")
Depth 117 mm (4.60")
Height 124 mm (4.88")
Weight (lbs.) 600 g (1.32 lbs.)
Mounting spacing W mm 15 mm (0.59")
Mounting spacing H mm 40 mm (1.57")
Features and benefits
DIN-rail mounting, Width 39 mm
Efficiency up to 95.2 %
20% Output Power Reserves
Easy Fuse Breaking due to High Overload Peak Current
Active Power Factor Correction (PFC)
Minimal Inrush Current Surge
Temperature range -25°C and +70°C (derating 6W / °C between 60°C - 70°C)
DC-OK Relay Contact
Class I Div 2, IECEx Zone 2 and ATEX Zone 2
Please contact me get more information
Email:Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com
ABB AC 800M and S800 IO voter SS822ZSS822Z 3BSC610055R1
ABB AC 800M and S800 IO power supply SD854SD854 3BSE088189R1
ABB AC 800M and S800 IO power supply SD853SD853 3BSE088188R1
ABB AC 800M and S800 IO power supply SD834SD834 3BSC610067R1
ABB AC 800M and S800 IO power supply SD833SD833 3BSC610066R1
ABB AC 800M and S800 IO power supply SD832SD832 3BSC610065R1
ABB AC 800M and S800 IO power supply SD831SD831 3BSC610064R1
ABB AC 800M and S800 IO power supply SD822ZSD822Z 3BSC610054R1
ABB AC 800M and S800 IO rechargeable battery unit SB822SB822 3BSE018172R1
