Нажмите, чтобы увеличить 
=== Мы снабжаем и доставляем защиту от ползания через забор, гармонь с бритвойпроволочная сетка, ворота, столбы и стойка. для строительства и монтажа полной системы ограждения. в панелях есть 358 сетки, Шплинты и решетки бритвы.
неаккурационная панель ограждения обычно состоит из 358 сварных сеток. защита от ползания забор очень трудно пробить, маленькие дырки эффективно предотвращают прикосновение пальцев, а обычные ручные инструменты очень трудно пробить 358 'из его измерений 3"X 0.5"X 8 калибр, метрическая система около 76.2mm x 12.7mm x 4 мм.
высокий уровень безопасности 358 ограждение от ползания представляет собой систему повышенной безопасности, которая используется в сочетании с проволочным кольцом типа "змеевик" и системой видеонаблюдения замкнутого цикла. широко используются для обеспечения безопасности в тюрьмах, воздушных перевозках, морских портах и на границах.
Общая информация о поставке:
общая толщина провода: 4 мм
размер отверстия: 76.2 * 12.7 мм, 12.5x75 мм
общая ширина панели: 2.2m, 2.4m, 3m
Высота панели: 1.8m, 2.1m, 2.4m, 3m
Post height : 2m, 2.3m, 2.5m, 2.7m, 3m, 3.6m
Post type: square fence post 60*60*2.0/2.5,80*80*2.0/3.0mm
Fitting: Flat bar, metal clips
Material: Carbon steel
Surface treatment: Electric galvanized, hot dipped galvanized, then powder coated; hot dipped galvanized
Color: Green, black, biege, others
SUPPLY OF ANTI-CLIMBING FENCE， GREEN PVC POWDER COATED, GI WIRE
Anti climb fence mesh panels, posts, metal clips and clamps, all to be hot dip galvanised then powder coating in green color RAL 6005, suitable for offshore area
Technical Details
Mesh Panel:
Panel size: 3000 mm height x 2515 mm width.
Material: ASTM A 641. Wire shall be steel and have class 3 zinc coating as specified in ASTM A 641 unless otherwise specified, wire shall have a tensile strength not less than 58,000 pounds per square inch.
Mesh pattern: 76.2 mm (3") * 12.7 mm (0.5") resistance welded well at each intersection with 1 'V' shaped beam.
Wire diameter: 4 mm horizontal wire and vertical Wire.
Weld strength: range 540 to 690 N/m2.
Surface treatment: Steel mesh fence panels made from hot dipped gi wire, then PVC powder coating (Min. 100 micron), or PVC powder painting.
Life span: With an additional powder coating protection, the metal fence is expected to have an increased potential life span to 25 years.
Color: Green RAL 6005
Fence posts:
Material: ASTM A 702 high grade steel tor maximum strength / rigidity. Steel fence posts and braces shall be made of high-grade steel for maximum strength and rigidity conforming to the requirements of ASTM A 702 far steel fence posts.
Post Section. 80 * 80 mm.
Post Plate thickness: 2.5 mm
Post Length: 3800 mm.
base Plate: 10 mm Plate: 200 x 200 mm
Fimsh: inside and outside galvanized ( Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 micron).
Color: Green RAL 6005.
Post cap: metal caps
metal clips and clamps are to be hot dip galvanized then powder coating in green color RAL 6005.
Anti-climb Fence Project Drawing Details
Material and fixing clamps: Interior / straight section
Material: ASTM A 702 - mm 80 * 80 * 2.5 SHS Clamps
Material mm 80 x 80 x 2.5 SHS Clamps NO. 10 {per straight section)
Made of high-grade steel for maximum strength and rigidity conforming to the requirements of ASTM A 702 for steel fence posts
Finish: inside and outside galvanized (Min . 275 g/m2), subsequently covered with a polymer powder (Min. 60 micron).
metal clips and clamps are to be hot dip galvanized then powder coating in green color RAL 6005.
Material and fixing clamps: Exterior/corner section
ASTM A 702 - mm 80 * 80 * 2.5 SHS Clamps
Material mm 80 x 80 x 2.5 SHS Clamps No. 20 (per corner section)
Made of high-grade steel for maximum strength and rigidity conforming to the requirements of ASTM A 702 for steel fence posts
Finish: inside and outside galvanized (Min 275 g/m2), subsequently covered with a polymer powder (Min. 60 micron)
metal clips and clamps are to be hot dip galvanized then powder coating in green color RAL 6005.
Inspection
All raw materials shall be tested.
All items listed shall be inspected at each stage of manufacture. A sample ot each manufacturing batch shall be made available tor inspector to determine it the required quality level as detailed has been met. The result of the inspection shall determine the acceptance or otherwise of the whole batch.
SECURITY ANTI CLIMB STEEL PICKET FENCE
Fabricate and install 8' high of wrought iron fence.
Three sliding gates25 feet x 8 feet high and 12 feet long x 8 feet
Material to be used:
2"sq. 1/8" steel posts and gates frame
Posts to be set in concrete
1.1/2"sq. 1l gauge top and bottom rails
3/4"sq.16ga. vertical pickets (pressed pointed top)
4"max. space in between pickets.
All steel fence and gates to be primer and painted black
