Check valve H14W-64P (NXQ-A-40/31. 5-LA One-way Charging Valve Nitrogen Charging Guide)

Product Introduction

Key Operation & Pressure Control Requirements (for NXQ-A-40/31. 5-LA Nitrogen Charging)

• Tool Preparation: Do not use a regular charging valve; a dedicated nitrogen charging tool set (equipped with a pressure gauge and preset pressure valve) is required to ensure operation efficiency and pressure accuracy.
• Secure Connection: Before connecting to the NXQ-A-40/31. 5-LA, release residual pressure in the accumulator first. Unscrew the charging valve's dust cap counterclockwise, align the tool's quick connector with the valve port and insert it until a "click" is heard, indicating a secure connectionthis method saves half the time compared to the traditional screw-tightening method.
• Pressure Preset & Charging: No repeated pressure adjustment is needed; use the tool's dial to set the required pressure. For example, if the system requires 20MPa, turn the preset pressure knob to the 20 mark, open the nitrogen cylinder valve, and the tool will automatically fill and stop when the set pressure is reached, preventing overfilling.
• Safe Disconnection & Inspection: After charging, do not disconnect the connector directly. First, open the tool's pressure relief valve to release residual pressure in the pipeline, then disconnect the connector to avoid oil spraying. Wait 5 minutes after charging, check the NXQ-A-40/31. 5-LA outlet pressure with a 0. 1MPa accuracy pressure gauge; readjust if the deviation exceeds 0. 5MPa.
• Matters Needing Attention: Nitrogen purity must be above 99. 9% to avoid gasket corrosion caused by impurities. Do not lose the charging valve's sealing gasket; reinstall it after each disassembly to prevent leakage. Following these steps, even beginners can complete nitrogen charging in half an hour without damaging the accumulator due to improper pressure.

Company Profile

• YOYIK widely adopts automation and CNC technology in production, and strict quality inspection processes ensure that each product meets the highest industry standards, winning wide recognition in the global market.
• To quickly respond to market demand, YOYIK has established an efficient supply chain system and a global service network, ensuring fast and timely product delivery both domestically and internationally. In addition, the company's 26-hour online technical support and all-round customer service further enhance customer satisfaction and trust.

Product Features & Applications

• Product Features: The H14W-64P check valve has high precision, reliable sealing performance and strong adaptability, matching the operating parameters of the NXQ-A-40/31. 5-LA one-way charging valve, assisting in safe and efficient nitrogen charging and protecting the accumulator system.
• Applications: Suitable for NXQ-A-40/31. 5-LA bladder accumulator systems, mainly used for auxiliary nitrogen charging control and system protection, applicable to related power station, industrial hydraulic and accumulator supporting scenarios, consistent with YOYIK's global service positioning.