Click to bigger picture..
YZH fixed mechanical arm for mine gravel
In mines and gravel aggregate yards, when a large amount of ore is piled up in the crushing chamber, it is easy to cause blockage. At this time, the traditional way to deal with the blockage is to turn off the power and stop working, and then clean up the blocked materials before resuming productionThere are usually two main reasons for the skip stop of jaw crusher: one is that the output of jaw crusher is high and the plate conveyor has no time to pull away; The second downstream equipment trips and stops, and the jaw crusher continues to crush. Failure to deal with the blockage of the material opening in time will not only affect the production efficiency, but also the materials adhered to the jaw plate will corrode the jaw plate, accelerate the wear of the jaw plate and shorten the service life of the jaw. Therefore, it is a very necessary step to conduct secondary crushing of large stone block materials before the materials enter ebook. Or if you don't want to stop production after the materials enter the material inlet, install one near the material inlet of ebookFixed manipulatorIt is very necessary that the fixed crushing manipulator can effectively avoid this problem.
YZH feed portFixed manipulatorYes & ldquo; One click cavity cleaning & rdquo; This function is used to solve the problem of blocking at the material port of the crusher. The principle is that the motor drives the hydraulic pump to control the oil cylinder through the electric proportional valve to move back and forth, and then hit the large stone block through the remote control or cab. The stone is broken into small stones in the material cavity, and the stone falls. The whole process does not need to stop, which does not affect the normal production.
contact supplier or email to admin@b2bgood.com for transport and cleanrance agent
