=== 不锈钢穿孔管通过焊接 穿孔不锈钢 主要用于汽车排气系统、过滤网、建筑和其他工业用途。穿孔不锈钢管也称为穿孔不锈钢管或不锈钢穿孔管。
不锈钢304穿孔管架-圆形管
试管架用穿孔管ss 304
材料规格:
管,1.5"圆形,1/16"穿孔304不锈钢,24 ga.1/8 cntr,23%开口。
6英尺长
管,1.5"圆形,3/32"穿孔304不锈钢,24 ga.5/32 cntr,33%开口。
标准长度(6英尺)。
不锈钢穿孔试管架可制成316或其他等级,穿孔可为圆形、方形或定制。
染色工艺用穿孔管
用于染色高压釜的穿孔管。
内径:80 mm
厚度:5mm
穿孔高度:400 mm
孔径:5mm或10mm
穿孔图案:交错
Material: stainless steel
Hygienic Perforated Stainless Steel Tubing
Perforated stainless-steel tubing used in pipework to ozonate cold deionised water.
Ozone gas is introduced into the water by means of a venturi method into a recirculated ozonated water from the tank. Inside the tank, the ozone-rich water exits at the opposite side of the tank relative to the suction side for the recirculation line. The tank is approximately 4 metres wide and 4 metres high. The recirculation pipework is 1 inch in size.
Material: 316 (Austenitic) used in the tank
Hygienic connection – end to be tube or pipe.
Perforated Tubes for Scientific Experiment
Dimensions 5 or 6 cm long, ID 3 cm
Thickness perhaps 0.05 - 0.1 cm.
Tubes perforated with small holes perhaps 0.2 cm in diameter
High transmission, min. 70%.
Holes square or rectangular.
Material: Stainless or aluminum, copper
Perforated Screen Filter Tube
Measurements below:
40" inches long
4" and 7/16" inches diameter
Stainless thickness 1.55mm 316
Screen hole size 3.15mm
Upper sleeve size 26.42mm
Centre sleeve size 9.69mm
Lower sleeve size 17.31mm
Perforated screen tubes in 316 stainless steel
316 SS Perforated tube
10/ 3” OD x #16 GA wall 316 SST perforated tube
1.8”diameter x 3/16” staggered centers
40% open area.
Perforated Stainless Steel tubes
Perforated tubing:
Perforated Tubes ID - 45 mm
Perforation hole diameter - 2.5 mm
Round S.S. mesh Perforated Tube
6” round S.S. mesh tube
Approximately ½” x 3/16” holes
We also supply straight sheets with the structure
Perforated 6” tube with the ½” x 3/16” holes
Stainless steel perforated tube is also used in exhaust and muffler of vehicles.
Perforated Stainless Steel Tubes / Pipes have following features:
1. Easy to wash and Reusable
2. Uniform pore size distribution
3. Good air permeability
4. High filter efficiency
5. Heat Resistance
6. High corrosion resistance