الصورة الكبيرة
=== Stainless Steel Performated Tubes are manufactured by Welding of أداء ستاينلس ستيل المواد into cyclindrical أو tubular form.used mainly لأجل vehicle exhaust system.filter screen.architectural and other industrial uses . إذا كان لديك أي معلومات أخرى عن هذا الموضوع الرجاء إضافته مجانا .
أنابيب الصلب 304 أداء راكس- جولة أنبوب
أداء tubing SS 304 اختبار أنبوب racks
مواد التخصص :
تيوب"الطريق"304 S / S ، 24 GA . 1 / 8 CNTRS ، 23 ٪ مفتوحة .
6 فيت لينغتس
تيوب"الطريق"304 S / S ، 24 ga.5 / 32 cntrs ، 33 ٪ مفتوحة .
معيار الطول في 6 قدم .
اختبار الأداء يمكن أن تكون مصنوعة في 316 أو غيرها من الدرجات ، يمكن أن يكون الأداء round.square أو العرف .
أداء أنبوب نمط الحياة العملية
أداء بيب في dyeing autoclave .
القطر الدولي : 80 مم
ثينكنيس : 5 مم
ارتفاع الأداء : 400 مم
القطر : 5 مم أو 10 مم
نمط الأداء : staggered
Material: stainless steel
Hygienic Perforated Stainless Steel Tubing
Perforated stainless-steel tubing used in pipework to ozonate cold deionised water.
Ozone gas is introduced into the water by means of a venturi method into a recirculated ozonated water from the tank. Inside the tank, the ozone-rich water exits at the opposite side of the tank relative to the suction side for the recirculation line. The tank is approximately 4 metres wide and 4 metres high. The recirculation pipework is 1 inch in size.
Material: 316 (Austenitic) used in the tank
Hygienic connection – end to be tube or pipe.
Perforated Tubes for Scientific Experiment
Dimensions 5 or 6 cm long, ID 3 cm
Thickness perhaps 0.05 - 0.1 cm.
Tubes perforated with small holes perhaps 0.2 cm in diameter
High transmission, min. 70%.
Holes square or rectangular.
Material: Stainless or aluminum, copper
Perforated Screen Filter Tube
Measurements below:
40" inches long
4" and 7/16" inches diameter
Stainless thickness 1.55mm 316
Screen hole size 3.15mm
Upper sleeve size 26.42mm
Centre sleeve size 9.69mm
Lower sleeve size 17.31mm
Perforated screen tubes in 316 stainless steel
316 SS Perforated tube
10/ 3” OD x #16 GA wall 316 SST perforated tube
1.8”diameter x 3/16” staggered centers
40% open area.
Perforated Stainless Steel tubes
Perforated tubing:
Perforated Tubes ID - 45 mm
Perforation hole diameter - 2.5 mm
Round S.S. mesh Perforated Tube
6” round S.S. mesh tube
Approximately ½” x 3/16” holes
We also supply straight sheets with the structure
Perforated 6” tube with the ½” x 3/16” holes
Stainless steel perforated tube is also used in exhaust and muffler of vehicles.
Perforated Stainless Steel Tubes / Pipes have following features:
1. Easy to wash and Reusable
2. Uniform pore size distribution
3. Good air permeability
4. High filter efficiency
5. Heat Resistance
6. High corrosion resistance
