不锈钢展平金属网展平至光滑,钛和铝

扁平膨胀金属是经过冷轧的常规膨胀金属，表面光滑平坦。该产品有碳钢、不锈钢、镀锌和铝合金。如果需要精加工边缘，U形封边可采用铝、碳钢和不锈钢。
扁平膨胀金属的常见应用：
&公牛；警卫
&公牛；击剑
&公牛；面板
&公牛；栅栏
&公牛；楼梯
&公牛；烤架
&公牛；屏幕
&公牛；还有更多

膨胀金属的特点：
&公牛；经济的
&公牛；耐用的
&公牛；极其通用
&公牛；易于安装
&公牛；低风荷载阻力
&公牛；轻松剪裁
&公牛；许多材质选项

不锈钢扁平膨胀网。
尺寸如下：
图案类型：0798S
等级：304或316（首选）
厚度：0.9mm
长度：19.08
SWD:7.26
钢绞线宽度：1.710mm

flattened expanded mesh titanium and stainless steel. the material should be 0.001" (~0.025mm) thick.
following configuration:
thickness: 0.001"
long diagonal: 0.020"
short diagonal: 0.012"
strand width: 0.008"

3/16 X .050 flattened expanded aluminum in a 3003 series

Stainless Steel Expanded Sheets, Flattened to smooth surface finish and re-squared cut to the following dimensions and specs:
Diamond size 1/16" (SWD) x 1/8" (LWD), and strand width of 1/8"
Length (SWD) 36.625" tolerance +/- 1/16"
Width (LWD) 18.025" tolerance +/- 1/16"
Strand thickness (after flattening) 0.030"- 0.035"

flattened expanded metal sheets:
Un- galvanized ( black ) Flattened
Size of sheet 1.25 mtr x 2.5 mtr
3.0 mm thickness
4.0 mm strand width
27.5 short way mesh x 50.8 long way mesh
( Hole: 19 mm x 41 mm )

flattened expanded aluminium sheet with the below specifications:
Material = Aluminium
LWO = approx. 16mm
SWO = approx. 8mm
Strand thickness = 2mm
Pre-cut dimension = 4,950mm x 240mm

HDG Expanded Mesh (Flatten after punching)
Size: 1220 x 2440mm
25mm x 75mm x 2.5mm x 2.5mm

expanded mesh 1/8 thick and flattened by 6 inches square

Diamond Hole Expanded Mesh, Flat Mesh

Flattened Expanded metal, Diamond Expanded metal, Special Expanded metal