Welded Wire Mesh Fence Products

This welded wire mesh fence system is designed to offer a durable, customizable solution for perimeter security. The materials used in its construction meet rigorous standards to ensure strength, stability, and long-lasting performance. The posts are made from high-quality materials that comply with ASTM specifications, while the welded wire fabric is reinforced with both galvanization and PVC coating for enhanced corrosion resistance. The fabric heights and panel sizes are flexible, allowing for customization based on specific project requirements. Below is a detailed breakdown of the materials used in the system.

• Posts: The posts for the fence must meet ASTM F1043 standards, with yield strength and section modulus that comply with or exceed ASTM F1083 pipe requirements. This ensures the posts have the necessary structural integrity to support the fence system.
• Welded Wire Fabric: The fabric is made from electronically welded low-carbon steel wire, forming the specified mesh pattern. The wire used is of ASTM A853, Grade AISI 1006, with a tensile strength of at least 70,000 PSI (485 MPa). After welding, the fabric is hot-dip galvanized with a zinc coating of at least 1.0 oz per square foot, followed by a PVC coating of 10 mils (0.25 mm). The PVC coating is applied in a continuous process, thermally fused to a primer on the galvanized wire, providing enhanced durability and corrosion resistance.
• Fabric Heights: Typical perimeter fences range in height from 8 to 16 feet, though custom heights can be specified. The fence panels are made in single panel construction, with standard panel dimensions of 5 feet by 2 feet in size and an 8-gauge wire thickness (125 mm × 51 mm × 4.11 mm). The panel width can range from 7 feet to 2 feet, and the height can be customized, with a common height specification of 2.75 meters.
•