brand:Welded Galvanized Steel Bar Panels for Concrete Reinforcing
Deliver goods:3 days after paydown
GI. Welded Wire Reinforcement Mesh is the irreplaceable concrete reinforcing mesh used in modern construction. It is made of high tensile steel wire spot welded into a square or rectangular mesh mat structure, prefabricated for concrete elements uses. Both electro galv. and hot dipped galvanised treatment available for anti corrosion resistance and long term uses.
Wire / Bar Diameter: 4mm-16mm
Space center of neighbor steel bar
Vertical: 100mm, 150mm, 200mm, 300mm
Horizontal: 100-400mm
Width: 0.5m-3m
Lengt: 2m-6m
Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.
Features and Benefits
• Economic transport;
• Ease and economy of storage space;
• Reduction of implementation time (high application performance);
• Installation does not require skilled labor;
• Quality ensured by the implementation in factory;
• Reduction of waste and failings.
Steel bar reinforcing mesh, Galvanizing finish, or Black wire mesh, non galvanized.
Wire diameter: 10mm, Mesh: 250mm x 250 mm (8” x8”), Sheet size: 11.6ft length x 7.6ft width
Structures:
Concrete Reinforcement Welded Mesh Sheet consists of pieces of wire or rebar welded together to form a grid pattern.
The size of the grid pattern is typically 4-inch-by-4-inch up to 8-inch-by-8-inch.
The hole of the grid is in square or rectangular shape:
Rectangular Welded Mesh with wires crossed in a form of a rectangle, and longitudinal wire as the supporting ones
Square opening welded steel mesh with wires crossed in a form of a square, and both longitudinal and transversal wires as supporting ones
Concrete Reinforcing Mesh, in 6 m × 2.4 m Sheet
| Technical Specifications | |||||||
| Longitudinal wire (6 m) | Cross wire (2.4m) | Fabric | Grid Pattern | ||||
| Size (mm) | Pitch (mm) | Area (mm2/m) | Size (mm) | Pitch (mm) | Area (mm2/m) | ||
| 10 | 200 | 393 | 10 | 200 | 393 | Welded steel mesh | Rectangular |
| 10 | 200 | 393 | 8 | 200 | 393 | ||
Welded Wire Reinforcement Mesh, Crimped, Galvanized, Conforming to ASTM 810
Welded Wire Mesh for Reinforcement
Wire form: Crimped / curved
Material: Galvanized mild steel
Quality: Conforming to ASTM 810
7½ width (190.5 MM)
Mesh: 67 mm x 25.4 mm
Number of line wire / width: 8
Wire diameter: 2.10 mm line wire x 1.70mm cross wire
Roll length: 165m
Welded Wire Mesh Reinforcement
Wire form: Crimped / curved
Material: Galvanized mild steel
Quality: Conforming to ASTM 810
Conforming to ASTM 810
7½ width (190.5 MM)
Mesh: 67 mm x 25.4 mm
Number of line wire / width: 8
Wire diameter: 2.20 mm line wire x 1.80mm cross wire
Roll length: 160m
Carbon Steel Rebar Welded Cage, especailly used for strengthening concrete in sub marine construction of oil pipes projects. It is made by welding with black steel rods into a cage-shaped steel banding mounted skeleton.
Welded Steel Rebar Mesh Cages
Reinforcing steel bar welded cages are circular mesh pads used in the pre-casting production of pits, covers and tunnels.
Ways to connect the short pile cages together:
A, Combine the main rebar first and then the pile cage, that is to say, butt weld the rebar of 9m length together to 9-27 meters and then use the pilemaster to longer pile cage.
B, Combine the pile cage and then the main rebar, first make the pile cage of 9m or 12m of standard. And then weld the short pile cages to longer pile cages.
Installation of the inner reinforcing bar and double rebar:
To get the double rebar pile cages to improve work efficiency, normally we suggest welding the second bar after the pile cage is formed.
And for the inner reinforcing bar, we supply the rebar bending machine to reinforcing the stirrup. Compare to weld manually, the difference is the rebar ends do not bond together, hence easier to install.
Standard Meshes (4.8m x 2.4m)
buy goods please contact supplier , for transport and cleanrance agent email to admin@b2bgood.com