Set up:1千克
supply:1000000千克
RUCO-BAC MED, German Rudolph Antibacterial and Antimildew Finishing Agent
Product ingredients:
Special heterocyclic compounds, non-ionic.
Areas of use:
Suitable for all types of fiber anti-mildew and anti-bacterial, bactericidal, anti-mite finishing agent, anti-washing and dry cleaning; especially suitable for personal textiles.
Nature:
- Bright colorless liquid
- 1.02G/CM3 at 20 C
- Easily dispersed in cold and warm water.
- Anti-mildew, anti-bacterial and bactericidal
-- hard water resistance
Resistance to washing and dry cleaning
It does not affect the rubbing, sweat and sunshine fastness of dyeing.
Application:
MED is environmentally friendly and biodegradable. MED can be directly added to the finishing solution.
Dip rolling process:
30-60G/L MED
PH 5-6
Rolling rate 60-70%
Drying up to 170 C under general conditions
Absorption process:
3-6% MED
PH 5-6
Temperature 40-50 C
Continue for 15-30 minutes
Next, it is dehydrated directly without washing, and then dried below 170 degrees Celsius.
For example, MED can be used in high temperature dyeing of polyester at 130 C, but it must be tested beforehand, because MED may accelerate the dyeing process, resulting in darker colour and exhaustion process. We recommend that MED be used in waterproof finishing of fluorocarbon fabric in the future, because the same bath with dyeing will not reduce the protection of fluorocarbon. Water effect.
Keep in storage:If stored for a long time below 0 or above 40 C, the product may become thicker or uneven, but heating or cooling to 20-25 C, and stirring will not affect the use. Tighten the lid of the barrel with the back cover.
Important Statement: Any representations in this information are based on controlled or laboratory work and are for reference only. Before using our products, the buyer is requested to carry out adequate tests and tests in accordance with the expected conditions of use by the buyer and to confirm whether the results meet the specific requirements of the buyer. The seller shall not be liable for any quality disputes, incidental or indirect losses arising therefrom.
Please contact the supplier.Or apply for purchasing agent mailto: contact supplier or email to admin@b2bgood.com for purchase help