Frishine supplies swimming pool fences for construction of swimming pool and permanent safety guarding, meeting Australia standard, USA standard and other international standard.

Permanent Welded Wire Mesh Fence

Welded mesh fence can be used to provide a lasting fencing barrier for swimming pool safety.

Rectangular Opening Welded Mesh for Pool Security:

• Material: High-quality low-carbon steel wire.
• Construction: Carbon steel wires welded.
• Posts: Peach-shaped (50x70mm, 70x100mm), 1.2mm thick, galvanized or coated in green, red, yellow, and blue.
• Mesh Sizes: 50×100, 50×150, 50×200, 55×100, 55×200, 65×100, and 65×200 mm.
• Panel Sizes: Ranging from 2,100×2,400 to 2,100×3,300 mm in various lengths and widths.
• Support Posts: Diameters available are 25, 32, 40, 42, and 48 mm.
• Pipe Specs: Outer diameter from 25 to 75 mm, with thicknesses of 1.7mm, 1.8mm, and 2.0mm.
• Finish: Both hot-galvanized and PVC-coated options for longevity and visual appeal.

Swimming Pool Temporary Fence

Portable fence ideal for short-term pool construction sites

Temporary pool fencing is usually made from durable materials, most common materials include:

• Steel: Steel panels can be hot-dipped galvanized with corrosion protection.
• Aluminum: Lightweight aluminum fence is resistant to corrosion, excellent choice for pool fencing.
• PVC/Plastic: Some temporary pool fences are made from high-quality, UV-stabilized plastic.
• Steel and aluminum fences are commonly coated with a black powder finish, with enhanced corrosion resistance and decorative effect.

Swimming Pool Safety Fence Australian Standard A.S.1926.1

Australian Standard A.S.1926.1 refers to the safety standards for swimming pool fencing in Australia. This standard is part of a series designed to enhance the safety of swimming pools and spas, particularly to protect children from the dangers of drowning or injury. The standards include requirements for the design, construction, and performance of fencing for swimming pools and spas, including the height and strength of barriers, the gaps allowed between vertical elements, the self-closing and self-latching mechanisms of gates, and the non-climbability of the fence.

We supply Temporary Pool Fence Panel meeting Australian Standard A.S.1926.1, for use during swimming pool construction and renovation.

Below are our pool safety fence with custom specifications shipped to Western Australia, to the Port of Fremantle:

• Pool Fencing – Straight Top Design
  Panels: 2400mm wide x 1200mm high
  Rails: 30mm x 30mm with radius corners, featuring 16mm round verticals
  Rails have holes at 96mm centres
  Material: Galvanised steel
  Finish: Galvanised and powder-coated, with matching gates
• Fencing Posts
  Size: 50mm x 50mm with radius corners x 5.8m long (1.6mm wall thickness)
  Material: Galvanised steel
  Finish: Galvanised and powder-coated
• Fencing Posts
  Size: 65mm x 65mm with radius corners x 5.8m long (1.6mm wall thickness)
• Higher Level of Security Fencing
  Size: 1800mm high x 2400mm wide
  Rails: 40mm x 40mm with radius corners (1.6mm wall thickness)
  Verticals: Pointed, 25mm x 25mm with radius corners (1.6mm wall thickness)
  Material: Galvanised steel
  Finish: Galvanised and powder-coated

 Project requiring 600 meters of basic steel pool fencing with 4 gates in New Zealand

• Standard Pool Fencing Panels:
  Width: Standard panels between 2400mm to 3000mm wide,  2400mm (about 8 feet) as common width.
  Height: Pool fencing at least 1200mm (about 4 feet) high to prevent children from climbing over.
• Gates:
  Width: Standard width of 900mm to 1200mm.
  Height: Same as the fencing,  at least 1200mm.
• Posts: For a 1200mm high fence, posts are often spaced every 2400mm and might be 50mm x 50mm or larger, depending on structural requirements.
• Material: Steel fencing, galvanized. Powder coating is also recommended for additional protection.