Technology Co. Yuhuan Sony Ericsson, Ltd.

Environmental protection equipment (renewable resources) --------- machine, broken machine set R & D and production and sales in one of the professional equipment manufacturers

Is a by the crushing knife roller system, carrying case, feeding system, power system, electronic system according to the composition of the machine, mainly used for hard to crushing waste, reduce the volume space saving for easy transportation and recycling, such as waste tires, construction materials, old furniture, electronic waste and other waste shredder.

Scrap: Classification Of I.

Scrap shredder come in many shapes and sizes, each manufacturer's appearance design characteristics, but according to the actual production needs, specific pieces, waste shredder internal knife and basically divided into four kinds, respectively is: uniaxial knife roller, double knife roller, four axis knife roller, coarse crushing knife and. So we can waste shredder is divided into four categories: single axis scrap shredder, biaxial scrap shredding machine (environmental protection does not have noise, a popular devices, four axis scrap (Shredder) environmental protection does not have noise, a popular, crude shredded scrap machine. devices)

Different from the appearance of the broken machine: the classification of scrap: The Following Is

1 single axis scrap

The knife roller speed for high lift 1450 R / min, the structure and of single and available cans, paint bucket and so on Al Cu Fe alloy metal hit the ball into the, broken into smaller, more uniform (or: 10mm*10mm*10mm). Currently on the market the most original, the most common, but there are two disadvantages: A: processing paint barrels, a large area of scrap iron efficiency and low power consumption. The second, the noise seriously as well. The advantages: can the four axis NC machining for biaxial fragments into a single machine play, high efficiency and small power consumption.

2 Scrap biaxial

Knife roller speed were 26/15 / min of and a high torque (I low speed crushing strength, double knife roller structure can be used for metal, soft plastic, tires and broken recycling, broken into the uniform (are) 20mm*20mm*50mm.

Four 3 axis scrap machine

/ min the knife roller speed were 26/15 of and a high torque (I low speed crushing strength, four knives and structure, especially in electronic waste, tires, contaminated soft materials broken, broken particles is medium, the more uniform and are 20mm*20mm*50mm.

4 waste coarse

Knife roller speed to low lift 60 rpm / min and a high torque (I low speed crushing strength, double knife roller structure, large power, especially for building materials, cars, large garbage pre broken, broken material is massive, large, B. (Lightman: 200mm*500mm* 200mm).

The machine: II. Use Of

1 save transportation costs, landfill costs. Some of the rubbish in life is very large, such as: furniture, garbage wood, waste If we take it To the landfill, it directly Can be imagined that the... Transportation cost is very expensive. Many people think that China is now a landfill field is free of charge, in fact, is misunderstood, we usually pay the garbage fees have been included in the fees paid to the landfill, and in the United States, trash to the landfill is paid according to the volume of waste, for words that your garbage volume more, you pay the cost of the more, because of the United States in the garbage disposal will first garbage broken in order to achieve the purpose of cost saving.

Of the garbage crusher the volume of, general waste can be reduced by After The Crushing 30%, reach 50%. some materials even

2 recycling of plastic waste. In fact, many of the plastic in our life can be recycled. For example: polyethylene, polystyrene, nylon, etc.. We can put it in a sufficiently small particle, and we can put it in the extruder to melt and then squeeze it out. But the key point is: the material used in the plastic waste must be small enough, because the extrusion granulation process before the process is generally to be broken plastic. People's life has been separated from the plastic, and therefore a lot of plastic waste, recycling of plastics is a very big market. The garbage is a good helper for the efficient and practical application of plastic recycling machine.

Need to worry we use the, microcomputer control motor in the course, of work if the load over the general assembly to reverse and remove obstacles. Safety Does Not

Ericsson Technology Co. Ltd. www.kwh588.com.cn reproduced, please specify, the source. Article Source: Sony

The main products of a our: the machine malfunctioned, of the machine, the machine, the paint, the paint, the machine, the machine, the machine, the machine, the machine, the machine, the machine, the machine, the machine, the machine. The machine. The machine

Of the company: the quality of survival to the amount, of development. Company: The Purpose

Kong Consultation Hotline: Mr. 18957678010